HP 2530 Update to YA_16_03_0003 Lost the ability to manage the stack via WebGUI

[JacobS90]

Hello after i updated my entire stack of HP 2530 Switches i lost the ability to manage them from the WebInterface.

My Hardware is a HP 2530 24G J9776A as the Stack Commander

and 12 HP 2530 48G J9777A as the Members.

I am still able to use telnet to manage them.

I would apreciate your help if you had similiar issues or if you know how to fix this.

Thank you and a good day to you.

[HP-Browniee]

Hi

Did you try all browsers? IE, firefox and Chrome?

Kind regards

[TerjeAFK]

Logon with telnet and run the command "show web-management"

Check if http or https is enabled

We are running YA.16.03.0003 on all our 2530 switches and have no problem with GUI (we are using https).

[JacobS90]

Yes i did try IE Firefox and Chrome the only thing missing ist the ability to manage the stack from the GUI the rest of the GUI is still there if i change to the traditional GUI i can see under system ip-stacking my stack but the rest of the stack-managment features are not avaible.

Thank you

[JacobS90]

We have not activated HTPPS access as of right now but will activate it at a later date.

My Web-Managment Configuration looks as follows

HTTP Access Enabled

HTTPS Access Disabled

Idle Timeout 600 Seconds

User Interface Improved

[Michael Patmon]

Hello.  This is probably due to the fact that the default WebUI changed to the new style in 16.03, which doesn't have the ability to manage IP stacks.  You'll need to use the "traditional" WebUI to manage those.  In the upper right click the user buttion (person icon) and "Launch Traditional GUI".  You can also configure the default back with:

(config)# web-management interface traditional

Hope that helps.  

[JacobS90]

Hello thank you that was it.

At this moment i feel dumb because i didn't try this sooner.

Thank you all for your help

Have a good day