HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 2920 advance operator user

 
erBabi1
Occasional Contributor

HP 2920 advance operator user

Hi to all,

I need to create a new operator user in my switches. This user needs to be able to see the current configuration. If I create this, is not be able to make a show running-config via CLI.... Is there some way to create this user? If this user would be a manager user with restricted privileges, could be one solution..... I don't know if this is possible...

Thanks in advance.

Regards.
David.

1 REPLY
Jihao
Occasional Visitor

Re: HP 2920 advance operator user

Hi,

you can....

with WB.16.01.0004 there ist RBAC, there a some new user-roles and you can define your own...

Take a look at :

http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c04943059-1.pdf

or you can look into authentication with TACACS and command authorization

hth

Carsten