Aruba & ProVision-based

HP 5900 Mirroring from multi vlan

Occasional Contributor

HP 5900 Mirroring from multi vlan

Hi everyone
I have two HP switch 5900 stack together. I want two mirror traffic from multiple vlan to one dest port. Please tell me the command to do that. I have read the document :

But i dont really understand. To mirror multi vlan to one dest port. Do i have to create accesslist, classifier_research.

For example : I have a switch A (HP-5900). And i have 3 vlan on it.

Vlan 10 :
Vlan 20 :

Vlan 30 :

<SwitchA> system-view

[SwitchA] acl number 3000

[SwitchA-acl-adv-3000] rule permit tcp destination-port any source

[SwitchA-acl-adv-3000] rule permit tcp destination-port any source

[SwitchA-acl-adv-3000] rule permit tcp destination-port any source

[SwitchA-acl-adv-3000] quit

[SwitchA] traffic classifier classifier_research

[SwitchA-classifier-classifier_research] if-match acl 3000

[SwitchA-classifier-classifier_research] quit

[SwitchA] traffic behavior behavior_research

[SwitchA-behavior-behavior_research] mirror-to interface Ten-GigabitEthernet 1/0/2

[SwitchA-behavior-behavior_research] quit

Please kindly notice i want to monitor all kind of traffic on vlan 10,20,30
Fix me if i wrong please!
Many Thanks!