Aruba & ProVision-based
1748117 Members
3596 Online
108758 Solutions
New Discussion

Re: HP Procurve - CRC errors using thunderbolt/ethernet adapter

 
Fifty87
New Member

HP Procurve - CRC errors using thunderbolt/ethernet adapter

Hi!

I've got a lot of users using Macbooks. They are connected to HP Procurve using thunderbolt/ethernet adapter. 

When there is more than 5-6 users, I see a lot of crc errors on each port of the switch. Has anyone met this kind of problem before? Setting up the same speed of transmission on the switch and network card unfortunately didn't help.

Thanks for your help!

Marcin

1 REPLY 1
maguanglongMike
HPE Pro

Re: HP Procurve - CRC errors using thunderbolt/ethernet adapter

Hi there,

it might be  a issue relating to Link Speed/Duplex Mode. Or there might be issues with the cable or adapter. 

cheers

Accept or Kudo