Aruba & ProVision-based
1748275 Members
3673 Online
108761 Solutions
New Discussion

Re: HP Procurve J9450A

 
juanmapalad
Occasional Contributor

HP Procurve J9450A

hi all,

 

i have some query regarding the hp procurve that i have:

 

query.jpg

 

how will i enable the gigabit ethernet of the procurve switch? so that i can connect it to a fiber cable.. will i need to make the port to trunk? or tagged? pls help

 

thanks

2 REPLIES 2
John Gelten
Regular Advisor

Re: HP Procurve J9450A

The screen-dump is showing the details for int.23. That should be available and operational.

 

If you want to enable int.24 (that's your question, isn't it ?) could you choose 'port 24' on the dropdown box and post that screen-shot.

The issue will probably be that the 'physical type' for int.24 is RJ45, meaning that the RJ45 interface is configured to be the active interface for that combo-port.

 

svmayol
Occasional Contributor

Re: HP Procurve J9450A

hello as a follow-up question above.. i have this hp procurve J9450A that will be connected to the fiber port of J9279A.. what will i need to configure? will i do trunking on this?

 

for the above.. if i disable the port 24 rj45, the gigabit port 24 will also automatically disable.. same with port 23

 

thanks

 

topology:

 

layout.jpg