HP Procurve with 2012R2 NPS Radius Authentication

[rybotech]

Hello, 

• Network Switch: HP J9148A 2910al-48G-PoE Switch
• NPS Server: Windows 2012R2

I'm trying to enable Radius authentication for the above but running into some trouble. I'm concerned the policies on the NPS isn't quite right. See below output of switch config and attached the NPS connection and network policy.

radius-server host 10.1.0.187 key Test123
radius-server key Test123
radius-server timeout 10
aaa authentication login privilege-mode
aaa authentication ssh login radius local
aaa authentication ssh enable radius local

Any help would be greatly appreciated.

[Richard Litchfield]

Check if my doc for 2008 NPS is still valid:

https://community.hpe.com/t5/ProCurve-ProVision-Based/Need-help-Setting-up-Radius/m-p/6293827