Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

HP Switch how to configure Uplink port

 
knightsguard
Occasional Visitor

HP Switch how to configure Uplink port

Hi,

New to working with switches. We have 3 VLAN's. Devices on VLAN 1 get DHCP IP and have internet access. Devices on VLAN2 have static IP and internet access. 

But devices on VLAN10 do not get DHCP or internet access even with a static IP. 

Port 48 is the uplink to a MX64 Firewall. Does this port need to be trunk or should the correct config work.

 

vlan 1
name "DEFAULT_VLAN"
no untagged 1-11,14,16-18
untagged 12-13,15,19-47,49-52
tagged 48
ip address 10.87.1.251 255.255.255.0
exit
vlan 2
name "POS"
untagged 1-11,14,16
tagged 48
no ip address
exit
vlan 10
name "ATMs"
untagged 17-18
tagged 48
no ip address
exit

3 REPLIES 3
Dennis Handly
Acclaimed Contributor

Re: HPE 2530-48G how to configure Uplink port

What model HPE switch do you have?

knightsguard
Occasional Visitor

Re: HPE switch how to configure Uplink port

It is a HP J9775A 2530-48G Switch

Vince-Whirlwind
Honored Contributor

Re: HPE switch how to configure Uplink port

Where is the default gateway IP address for the VLAN10 clients?