Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

HP procurve 6120 XG

 
Highlighted
NDO
Super Advisor

HP procurve 6120 XG

Hi All!

 

we recently acquired a blade system on a C7000 enclosure, but did not came with the 1Gb HP pass-thru ethernet switch, instead came with a procurve 6120 XG switch, which does not have ethernet ports. the ports I can see resemble the ones that uses FC cables.

How do I connect that to a ethernet switch?

3 REPLIES 3
Highlighted
TerjeAFK
Respected Contributor

Re: HP procurve 6120 XG

You can either use a fiber transceiver (for example J4858C for multimode) and connect it to a fiber transceiver in your Ethernet switch, or you can buy a X121 transceiver which gives you a RJ45 port in the 6120XG.

Highlighted
Ian Vaughan
Honored Contributor

Re: HP procurve 6120 XG

Hello,

Quickspecs here - http://www8.hp.com/h20195/v2/GetPDF.aspx/c04140206.pdf

scroll down for all of the options.

It would be well worth seeking out the latest version of software to put onto the switch before it goes into production.

Follow the Tech support / manuals link from the product page and use the Drivers / software / firmware link

Let us know how you get on.

Thanks

Ian

Hope that helps - please click "Thumbs up" for Kudos if it does
## ---------------------------------------------------------------------------##
Which is the only cheese that is made backwards?
Edam!
Tweets: @2techie4me
Highlighted
NDO
Super Advisor

Re: HP procurve 6120 XG

Hi

 

we decided to change the fiber SFP on the switch, for ethernet SFP´s, so we are in the process of acquiring that.