Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

HPE Aruba 2530 spanning-tree with vlan and port trunking or server teaming

 
Shay Hanya
Occasional Contributor

HPE Aruba 2530 spanning-tree with vlan and port trunking or server teaming

Hi

I have 2 Aruba 2530, sw1 24g ports and 2nd 48g ports.

Between the switches there are 2 cables conncted in trunk mode sw24 ports 23&24 connected to sw48 on ports 47&48.

The spanning-tree is enable on  the 2 sw.

In the logs of the switch there is always messages port 47 is down or port 48 is down.

What should I do that the prots will be always up?

The are 2 servers that are connected the the 24 sw, each server with 2 nic's. There are alot of disconected messages and lost connection to the servers, the servers nic are configured as dynamic and the ports on the switch as lacp.

What I"m doing wrong?

BR

Shay

1 REPLY 1
parnassus
Honored Contributor

Re: HPE Aruba 2530 spanning-tree with vlan and port trunking or server teaming

It's hard to tell (and help you) without seeing sanitized switches running configurations...