Aruba & ProVision-based

HPE officeconnect 1820 VLAN configuration

 
ArwenD
Occasional Contributor

HPE officeconnect 1820 VLAN configuration

Hello,

 

I have a network setup with an HPE layer3 swtich and a bunch of managed L2 HPE officeconnect 1820 switches. I have creadted VLANs for the different types of deivces that I have on the network and everything with that is going well. I am now having issues in setting up my management VLAN (99). I guess I'm not sure if I should have the uplink ports as tagged or untagged for VLAN 99. Also on the setup network screen, I know I need to have the management vlan as 99, but do I need to setup a management port? 

6 REPLIES 6
ArwenD
Occasional Contributor

Re: HPE officeconnect 1820 VLAN configuration

Update: I was able to get the management VLAN to 99, but I have to keep the uplink port as tagged for VLAN 99 or else I can't communicate with it. This doesn't sound right...

akg7
HPE Pro

Re: HPE officeconnect 1820 VLAN configuration

Hello,

If you are connecting switch to uplink then it would be tagged to get multiple vlans traffic from uplink.

Thanks!

 

I am an HPE Employee

Accept or Kudo

ArwenD
Occasional Contributor

Re: HPE officeconnect 1820 VLAN configuration


@akg7 wrote:

Hello,

If you are connecting switch to uplink then it would be tagged to get multiple vlans traffic from uplink.

Thanks!

 


Right. I get that, but there has to be at least one untagged vlan. Default is vlan 1. Can you not change the uplinks to a different untagged?

akg7
HPE Pro

Re: HPE officeconnect 1820 VLAN configuration

Hello,

Could you please share the snapshot where you are seeing one untagged vlan?

Thanks!

 

I am an HPE Employee

Accept or Kudo

ArwenD
Occasional Contributor

Re: HPE officeconnect 1820 VLAN configuration

vlan 28.pngvlan 1.png

akg7
HPE Pro

Re: HPE officeconnect 1820 VLAN configuration

Hello,

As per your query:

Right. I get that, but there has to be at least one untagged vlan. Default is vlan 1. Can you not change the uplinks to a different untagged?

Here untagged is for access port and tagged is for trunk port. I believe you can change other vlan as untagged.

From the shared screen shot I am seeing output for VLAN 1 & VLAN 28.

Which port you are conencting to uplink with vlan 99?

Thanks!

 

I am an HPE Employee

Accept or Kudo