Aruba & ProVision-based
1753706 Members
4696 Online
108799 Solutions
New Discussion

Re: Hp 2930M - Bandwith errors

 
SOLVED
Go to solution
_Thomas_
Advisor

Re: Hp 2930M - Bandwith errors

Here you go! Cables are directly connected trough cat6A cable.

 

show interfaces A1-A4

Status and Counters - Port Counters for port A1

Name :
MAC Address : f40343-d1d80e
Link Status : Up
Port Enabled : Yes
Totals (Since boot or last clear) :
Bytes Rx : 2,220,711,948 Bytes Tx : 2,518,433,360
Unicast Rx : 2,197,978,165 Unicast Tx : 3,515,607,491
Bcast/Mcast Rx : 11,788,235 Bcast/Mcast Tx : 8,414,480
Errors (Since boot or last clear) :
FCS Rx : 0 Drops Tx : 0
Alignment Rx : 0 Collisions Tx : 0
Runts Rx : 0 Late Colln Tx : 0
Giants Rx : 0 Excessive Colln : 0
Total Rx Errors : 0 Deferred Tx : 0
Others (Since boot or last clear) :
Discard Rx : 0 Out Queue Len : 0
Unknown Protos : 0
Rates (5 minute weighted average) :
Total Rx(Kbps) : 6,936 Total Tx(Kbps) : 80
Unicast Rx (Pkts/sec) : 638 Unicast Tx (Pkts/sec) : 371
B/Mcast Rx (Pkts/sec) : 11 B/Mcast Tx (Pkts/sec) : 19
Utilization Rx : 00.06 % Utilization Tx : 0 %


Status and Counters - Port Counters for port A2

Name :
MAC Address : f40343-d1d80d
Link Status : Up
Port Enabled : Yes
Totals (Since boot or last clear) :
Bytes Rx : 139,523,404 Bytes Tx : 1,696,099,603
Unicast Rx : 308,309 Unicast Tx : 323,811
Bcast/Mcast Rx : 27,683 Bcast/Mcast Tx : 15,774,465
Errors (Since boot or last clear) :
FCS Rx : 0 Drops Tx : 0
Alignment Rx : 0 Collisions Tx : 0
Runts Rx : 0 Late Colln Tx : 0
Giants Rx : 0 Excessive Colln : 0
Total Rx Errors : 0 Deferred Tx : 0
Others (Since boot or last clear) :
Discard Rx : 0 Out Queue Len : 0
Unknown Protos : 0
Rates (5 minute weighted average) :
Total Rx(Kbps) : 0 Total Tx(Kbps) : 0
Unicast Rx (Pkts/sec) : 0 Unicast Tx (Pkts/sec) : 0
B/Mcast Rx (Pkts/sec) : 0 B/Mcast Tx (Pkts/sec) : 23
Utilization Rx : 0 % Utilization Tx : 0 %


Status and Counters - Port Counters for port A3

Name :
MAC Address : f40343-d1d80c
Link Status : Up
Port Enabled : Yes
Totals (Since boot or last clear) :
Bytes Rx : 3,633,803,351 Bytes Tx : 2,429,108,147
Unicast Rx : 2,435,776,210 Unicast Tx : 531,174,338
Bcast/Mcast Rx : 25,476 Bcast/Mcast Tx : 901,986
Errors (Since boot or last clear) :
FCS Rx : 0 Drops Tx : 0
Alignment Rx : 0 Collisions Tx : 0
Runts Rx : 0 Late Colln Tx : 0
Giants Rx : 0 Excessive Colln : 0
Total Rx Errors : 0 Deferred Tx : 0
Others (Since boot or last clear) :
Discard Rx : 0 Out Queue Len : 0
Unknown Protos : 0
Rates (5 minute weighted average) :
Total Rx(Kbps) : 0 Total Tx(Kbps) : 0
Unicast Rx (Pkts/sec) : 0 Unicast Tx (Pkts/sec) : 1
B/Mcast Rx (Pkts/sec) : 0 B/Mcast Tx (Pkts/sec) : 1
Utilization Rx : 0 % Utilization Tx : 0 %


Status and Counters - Port Counters for port A4

Name :
MAC Address : f40343-d1d80b
Link Status : Down
Port Enabled : Yes
Totals (Since boot or last clear) :
Bytes Rx : 0 Bytes Tx : 0
Unicast Rx : 0 Unicast Tx : 0
Bcast/Mcast Rx : 0 Bcast/Mcast Tx : 0
Errors (Since boot or last clear) :
FCS Rx : 0 Drops Tx : 0
Alignment Rx : 0 Collisions Tx : 0
Runts Rx : 0 Late Colln Tx : 0
Giants Rx : 0 Excessive Colln : 0
Total Rx Errors : 0 Deferred Tx : 0
Others (Since boot or last clear) :
Discard Rx : 0 Out Queue Len : 0
Unknown Protos : 0
Rates (5 minute weighted average) :
Total Rx (bps) : 0 Total Tx (bps) : 0
Unicast Rx (Pkts/sec) : 0 Unicast Tx (Pkts/sec) : 0
B/Mcast Rx (Pkts/sec) : 0 B/Mcast Tx (Pkts/sec) : 0
Utilization Rx : 0 % Utilization Tx : 0 %

 

 

A1 10GigFD | 5968 573 00.05 | 0 352 0
A2 10GigFD | 0 0 0 | 0 26 0
A3 10GigFD | 0 0 0 | 0 2 0
A4 10GigFD | 0 0 0 | 0 0 0

_Thomas_
Advisor

Re: Hp 2930M - Bandwith errors

Hi,

Attached, there is also a screenshot of the network adapters of the servers.

Kind regards,

Thomas Willems