1748123 Members
3385 Online
108758 Solutions
New Discussion

IDO

 
MagneIT
New Member

IDO

Hi,

to be able to test SNMPwalk/status and configure SNMPv3 from Icinga2 to a HPE Aruba 8320 (Product: JL581A) I need an OID. I can't find the OID on the device, to be able to test the connection. Maybe it has something to do with a MIB?

Is it possible to receive some assistance regarding this?

I'm able to do a:

snmpwalk -v3 -l authPriv -u USERNAME -a MD5 -A "PASSWORD" -x DES -X "PASSWORD" %IP%

but a OID doesn't show up. If I add an "OID" to the end when trying a connection from the Linux Icinga2 monitoring server to the SW i get:

DISMAN-EVENT-MIB::mteHotOID = No Such Object available on this agent at this OID

Build ID is ArubaOS-CX:TL.10.04.0040. 

If i search for 8320 and click "JL581A" from the following webpage: HPE
I don't receive any results.

Aruba Support product for the dfevice is located here: Release notes 

Any assistance would be appriciated, thanks  

1 REPLY 1
drk787
HPE Pro

Re: IDO

@MagneIT Hi, check if you are able to do the snmpwalk with the OIDs given in the below. Try the one under OS-CX and not under PVOS.

  link.https://community.arubanetworks.com/blogs/esupport1/2020/04/16/oids-for-pvos-and-os-cx-health-status 

 

Also refer the below URL for snmp configuration.

https://support.hpe.com/hpesc/public/docDisplay?docId=a00091705en_us 

 

Thank You!
I am an HPE Employee

Accept or Kudo