Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

IP Vlan Management Stack HP2920

 
toniino301
Occasional Visitor

IP Vlan Management Stack HP2920

Hi everyone,

I've three stacks with 3 HP 2920 with differents vlans.

I've a vlan "MANAGEMENT" with ID 10. I would like to set the IP swith in 172.16.1.1/27 but into setup an "invalid value" message appears setting this IP.

The idea is to get a vlan 10 Management configured into the 3 stacks with Stack 1 (172.16.1.1) Stack 2 (172.16.1.2) Stack 3 (172.16.1.3). How can I do this ? Why I receive this message ?

Thanks a lot,

Best regards