Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

JL083A module not found in hp Aruba 2930M switch

 
SOLVED
Go to solution
Highlighted
apstool
Occasional Visitor

JL083A module not found in hp Aruba 2930M switch

date 11/8/2018,  I just ordered JL083a  (4 port ) 10 gig SFP card to install into the HP Aruba 2930M. Upon adding expansion card shutdown power instlled and reboot. As you say and I see; the card is not being found in the show run command.   

i did >show run,>show int br, >erase startup-config, >show module  and its still not seeing card and firmware is old like  your notes  #WC.16.04.0004 and I seen a new firmware  16.004.008.  I have not tried to update firmware yet.  

basically was hoping plug and play like the 4 smart-card 

 

3 REPLIES
parnassus
Honored Contributor
Solution

Re: JL083A module not working with hp2930M switch

Do yourself a favour and update your (never released) WC.16.04.0004 to latest, as of today, WC.16.07.0002. Once done paste the output of show modules command...the JL083A should be properly recognized and listed.
apstool
Occasional Visitor

Re: JL083A module not working with hp2930M switch

date 11/14/2018  The 10gig add-card is working after upgrade firmware  WC16.x.008  thank you for your suggestions and keeping up with the blog.   

parnassus
Honored Contributor

Re: JL083A module not working with hp2930M switch

Glad it worked. Please mark the post that helped you solve your issue as accepted as solution and, if you want, also give kudos.