Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

Joining procurve switches together

 
SOLVED
Go to solution
amaze_it
Occasional Advisor

Re: Joining procurve switches together

Thanks for the quick reply.  I have tried as you suggested, and turned on DHCP for one of the other VLANs - it does indeed pick up an IP fine; so i'm starting to suspect it's specifically to do with the phones.  I noticed that when i set up the trk port it's automatically added "spanning-tree Trk1 priority 4" to both configs - i've tried the global spanning tree disable command but it's still there.  Could this be the cause (bearing in mind my previous information about the IP phones)?

amaze_it
Occasional Advisor

Re: Joining procurve switches together

i've attached the config for both switches (ip addresses removed) - any help would be appreciated. 

 

The phones are clearly struggling to get DHCP as they are reporting "DHCP Timeout" and then restarting when connected to the new switch.

Highlighted
Uma_Maheswar
Frequent Advisor

Re: Joining procurve switches together

You missed on Tagging "Trk1" on Core Switch for Vlan 2

 

 

amaze_it
Occasional Advisor

Re: Joining procurve switches together

can't believe i missed that....you are indeed correct.  added to VLAN2 on main switch and phone immediately came online.

 

Thanks you once again :)

Uma_Maheswar
Frequent Advisor

Re: Joining procurve switches together

Cheers...