Aruba & ProVision-based
1748285 Members
3806 Online
108761 Solutions
New Discussion

LACP Trunk over EthernetConnect

 
KVTrierSBG
Occasional Collector

LACP Trunk over EthernetConnect

Hello,

at the moment we are in the planing of a new branch office.

We got two connections from the HQ to the BO.

First:

EthernetConnect Deutsche Telekom - 1 Gbit

Second:

EthernetConnect Local Carrier - 1 Gbit

I want to make a LACP Trunk over booth connections. So that i can use 2 Gbit/s and a carrier and geo reundancy.

Have every one try this configuration?

Thank You!

1 REPLY 1
parnassus
Honored Contributor

Re: LACP Trunk over EthernetConnect

Before asking such question...one should verify IF involved Carriers, with what they are offering you, are concurrently fulfilling all well known (and essential) LACP ports aggregation requirements...so a first reasonable question that need to be answered (and such answer will provide you a real Go/No-Go scenario) would be: Are both EthernetConnect offers providing you direct "point-to-point physical links (without any intermediate device along both paths)" or not?

I'm not an HPE Employee
Kudos and Accepted Solution banner