Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

Multicast routing between VLANS

 
Erengard
Occasional Advisor

Multicast routing between VLANS

I need help with a configuration, not sure why is not working

I want to allow multicast trafic between 2 VLANS. Just 1 switch (procurve 3500yl-48 with premium license)

If i do just 1 VLAN with all it works perfectly, if i put them in 2 VLANS is does not work at all.

My configuration with 2 VLANs:

ip routing

ip multicast-routing

router rip -> no auto-summary (this should not be needed but it will when i expand to more sw)

vlan * -> ip igmp, ip rip all, ip pim-dense -> ip-addr any

That in both vlan involved should work, rigth?

Sh igmp gives me all the multicast addresses in both interfaces, sh pim gives no much information.... no routes from one to the other vlan

2 REPLIES 2
Erengard
Occasional Advisor

Re: Multicast routing between VLANS

Just a bit more information, may be important. I need those multicast to be jumbo package (jumbo is active in all the vlans)

The objective is to route VXLANs from one VLAN to the other. Again, it works if both hosts are in the same VLAN but not if they are in different VLANs.

Erengard
Occasional Advisor

Re: Multicast routing between VLANS

Can someone help me please???? Anyone who knows???