Not able to configure SFP interface on Aruba MSR3012

[Belmond]

Hello everyone.

I am trying to configure SFP0 interface on Aruba router MSR3012 and I am having issues.

I tried to run "show interface brief ", but all I have listed is 

Protocol: (s) - spoofing
Interface Link Protocol Main IP Description
Aux0 UP -- --
GE0/0 UP UP 
GE0/1 UP UP 
GE0/2 DOWN DOWN --
InLoop0 UP UP(s) --
NULL0 UP UP(s) --
REG0 UP -- --

I have nothing to point me to SFP configuration

I also tried to browse for any CLI Manual for that product and I do not see any info.

Any hale will be greatly appreciated.

[drk787]

@Belmond

Greetings!

The MSR 3012 has 2 number of Fixed 10M/100M/1000M RJ45 ports, and  1 COMBO 1000M RJ45/SFP port.

If you want to use the SFP port, use the 'combo enable fiber' command to enable.

Example:

[MSR3012-GigabitEthernet1/0/0]combo enable?
copper - Copper port
fiber -  Fiber port

Please refer the quick specs guide:  https://h20195.www2.hpe.com/v2/GetPDF.aspx/c04123140.pdf

MSR 3000 Interface command reference guide:

https://support.hpe.com/hpsc/doc/public/display?sp4ts.oid=1008832085&docLocale=en_US&docId=emr_na-c03945631&withFrame