Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

PoE on HPE Aruba 2530-48G

 
SOLVED
Go to solution
Highlighted
chupacabra
Visitor

PoE on HPE Aruba 2530-48G

Contemplating buying a couple of HPE Aruba 2530-48G PoE (J9772Aswitches for a small office. We'll be transitioning to IP phones, so we need PoE. I'm wondering if it's possible to turn off/disable PoE on specific ports.

2 REPLIES 2
Highlighted
Solution

Re: PoE on HPE Aruba 2530-48G

Hello, 

Yes, it is possible to disable PoE on specific ports. In the CLI you can use the following sequence of commands to disable PoE on port 1 (as an example)

config   (you are entering global configuration context with this command)

interface 1 (you are entering port 1 configuration context with this command)

no power-over-ethernet

If you want to enable PoE you just leave out the no in the command. so the command will be - power-over-ethernet.

You can do the same for multiple ports with one command

config   (you are entering global configuration context with this command)

interface 1-24 (you are entering  configuration context for all ports 1 to 24 with this command)

no power-over-ethernet

Non contiguous ports can also be added and separated by commas. 

interface 1-24,28,30-48

I am an HPE employee

Accept or Kudo


Highlighted
chupacabra
Visitor

Re: PoE on HPE Aruba 2530-48G

Perfect. Thank you very much, Emil.