Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

Port-access and Radius Authentication

 
JamelB
Occasional Contributor

Port-access and Radius Authentication

Hello,

I have configured port-access with radius authentication on a HP PC 2524, and configured a Radius server using Windows 2012 R2.

The authentication is stuck on "connecting" status on the switch when I plug a computer to the port where I have configured the aaa authentication. There is no log on HP or Radius side. I'm stuck since a week and maybe your advices can be helpful :)

Attached some screenshot of the configuration.
There is no firewall between the radius server and the switch.

Thank you if you can help

Jamel