Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

ProCurve Switch 2510G-24 (J9279A) firmware update

 
SOLVED
Go to solution
pagrenin
Occasional Contributor

ProCurve Switch 2510G-24 (J9279A) firmware update

I have 5 ProCurve Switch 2510G-24 (J9279A) running Y.11.12, ROM N.10.02 needing firmware updates.  Are there any limitations with going straight to Y.11.52 or do I need to iterate through each of the revisions?  Presumably, I could flash the secondary to Y.11.52 and see if it boots successfully.  Thoughts?  Recommendations?

Thanks,

-PG

2 REPLIES 2
Highlighted
parnassus
Honored Contributor
Solution

Re: ProCurve Switch 2510G-24 (J9279A) firmware update

Latest Y.11.52 uses the same BootROM version of first Y.11.12 (Y.11.52 uses BootROM N.10.02 as Y.11.12 does) so you can safely update Y.11.12 directly to Y.11.52 (no automatic double reload will happen since BootROM will not be updated during the update of System software).
Highlighted
pagrenin
Occasional Contributor

Re: ProCurve Switch 2510G-24 (J9279A) firmware update

@parnassus Thx.  I jumped through several versions before just updating to straight to Y.11.52.  Appreciate your quick response.

Regards,

-PG