Aruba & ProVision-based
1748202 Members
3199 Online
108759 Solutions
New Discussion

Problem Upgrade Procurve 2530G-48

 
Pignedoli
Occasional Contributor

Problem Upgrade Procurve 2530G-48

Hi all,

  i have a problem to upload new firmware on switch Procurve 2530G-48.

 

This are the system information:

 


 Status and Counters - General System Information

System Name        : SW1
Software revision  : YA.15.10.0003
ROM Version        : YA.15.09
Up Time            : 159 days

Memory   - Total   : 67,108,864  
CPU Util (%)       : 4

Free    : 41,204,372  

I tried to upload image via TFTP with this command:

 

copy tftp flash xxx.xxx.xxx.xxx YA_15_13_0005.swi secondary

 

But the system return this error:

Cannot open dst in RAM
00000K Request failed.

 

I have try to upload image via web, but I recieved this error:

 

Upload failed! Open of /ramfs/os.bin failed, errno=23

 

I copied primary image in secondary without problem.

 

I downloaded secondary image from switch to computer without problem.

 

I erased secondary image without problem.

 

Where is a problem?

 

Thanks.

3 REPLIES 3
JamesOldfield3
New Member

Re: Problem Upgrade Procurve 2530G-48

Has anyone found a solution to this problem? I have many switches with the same issue.

Sk33t3r
Advisor

Re: Problem Upgrade Procurve 2530G-48

Have the same issue. One post said the solution so far was to factory reset the switch and upgrade from there. That's uhh really not going to work for me. I have over 80 switches to upgrade before the year's out along with everything else on my list and I can't spend all year on this nonsense! Anyone have a fix for this?

usa-nvsa3454-sw66# show flash
Image Size (bytes) Date Version
----------------- ------------ -------- --------------
Primary Image : 8792643 08/24/12 YA.15.10.0003
Secondary Image : 8792643 08/24/12 YA.15.10.0003

Boot ROM Version : YA.15.09
Default Boot : Primary

usa-nvsa3454-sw66# copy tftp flash 10.160.12.178 YA_15_18_0013.swi secondary
The Secondary OS Image will be deleted, continue [y/n]? y
Cannot open dst in RAM
00000K Request failed.
usa-nvsa3454-sw66#

 

40MB left over in memory, what gives?

Sk33t3r
Advisor

Re: Problem Upgrade Procurve 2530G-48

Nobody? Nothing? these are memory issues. There should be a way to flush them memory without bricking the **bleep** thing, right? Hidden Commands? edomset?