Problem put the 10 g interface to work on the blade.

[Marcos_Max]

We were using the "ProCurve 6120G / XG Blade Switch" switch in which it works normally on Ethernet interfaces. Only we needed a 10 g interface and we got the "hp vc flexfabric 10gb / 24-port module switch".
Someone could help me with what I should do to work this switch, I've tried to take all the switchs and leave this new in bay 1, it recognizes, not the error and the interface with Router Mikrotik is at 10 G.

Even with the interface closed in 10 G I can not ping the IPs on virtual machines.

If you need more information, just let us know

Thank.

[Colorado23]

I have exactly the same problem. Anyone got a suggestion? This is quiet a common issue , please suggest me if you find any solution for it .

[sangam_s · Accepted solution]

please open case with HPE