Problem with Printer using 802.1x

[bmcgehee]

Thanks for reading my post. I have an issue with a device. whenever 802.1x is activated on the port where a certain printer is. I goes linkdead. I don't see anything on the switch that would make it do this.  turn off 802.1x and it comes right back on. the radius server (clearpass) never sees the device.

Any help or ideas would be appreciated.

thanks!

[GuruP]

Need more information to understand the issue better. What device is the printer connected? What sw version is running in the switch? the dot1x config from the switch?

[bmcgehee]

Switch procurve 5412

aaa authentication port-access eap-radius

aaa port-access authenticator a14

aaa port-access authenticator a14 reauth-period 3600

aaa port-access authenticator a14 client-limit 3

aaa port-access authenticator a14 logoff-period 864000

aaa port-access authenticator active

aaa port-access mac-based a14

aaa port-access mac-based a14 unauth-period 60

aaa port-access mac-based a14 quiet-period 60

aaa port-access mac-based a14 unauth-vid 150

aaa port-access mac-based a14 logoff-period 864000