Procurve 2650 firmware upgrade

[Rob-Webb]

I have a couple of Procurve 2650 PWR switches to upgrade. They were setup a long time ago back in 2008 and their firmware is very much out of date.

They are both runnning H_10_38 firmware versions and I can see that the latest is H_10_119.

Both switches are PoE and have some VLANS setup on them to enable our ShoreTel  phone system to run.

I was wondering if anyone else has taken on older switches and managed to upgrade them successfully, or if they encountered any issues?

I plan to use TFTP to update them and have their configs backed up.

Many thanks.

[Vince-Whirlwind]

Upgrading Procurves is a prety straightforward process = just make sure you read the release notes all the way through so you know what you're changing.