Aruba & ProVision-based

QoS on HP/Aruba

 
SOLVED
Go to solution
vpaus
Occasional Contributor

QoS on HP/Aruba

Hi,

I have would like to  implement a QoS strategy on vlan based. I am new to HP so I did little bit of research before implementing it, as far as i have read on different community board and HP knowledge base, all i think i need to do  is activate Qos on my switch globally and then activate it on each. So for example if on my 3540 switch i have 5 vlans; Vlan 1 for management,Vlan10 for VoIP, vlan 15 for wired, Vlan 20 for SAN and Vlan 35 for wireless...

then as far as i know what i need to configure in 3540 is following:

(config)#qos type-of-service dscp

vlan 1 qos ef

vlan 10 qos ef

vlan 15 qos af13

vlan 20 qos af43

vlan 35 qos af13

My question is are these commands enough to implement QoS on my network?

2 REPLIES 2
akg7
HPE Pro

Re: QoS on HP/Aruba

Hello,

 

What is the device product number 'JXXXXX' ?

 

I believe you need to modify like this:

 

(config)#qos type-of-service diff-services

vlan 1 qos dscp ef

vlan 10 qos dscp ef

vlan 15 qos dscp af13

vlan 20 qos dscp af43

vlan 35 qos dscp af13

 

Thanks!

I am an HPE Employee

Accept or Kudo

akg7
HPE Pro
Solution

Re: QoS on HP/Aruba

Hello,

 

HPE is awaiting your response. Please confirm status of your query.

 

Thanks!

I am an HPE Employee

Accept or Kudo