Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

QoS on a 5406zl

 
Udo1
Occasional Visitor

QoS on a 5406zl

Hi all,

we need to adapt Cisco QoS Config (2960X/ 4500X) to a 5406zl switch.

Example for an 2960X Cisco Switch:

################################################

mls qos

mls qos queue-set output 1 buffers 15 30 35 20

mls qos queue-set output 1 threshold 1 100 100 100 100

mls qos queue-set output 1 threshold 2 80 90 100 400

mls qos queue-set output 1 threshold 3 100 100 100 400

mls qos queue-set output 1 threshold 4 60 100 100 400

mls qos srr-queue output cos-map queue 1 threshold 3 4 5

mls qos srr-queue output cos-map queue 2 threshold 1 2

mls qos srr-queue output cos-map queue 2 threshold 2 3

mls qos srr-queue output cos-map queue 2 threshold 3 6 7

mls qos srr-queue output cos-map queue 3 threshold 3 0

mls qos srr-queue output cos-map queue 4 threshold 3 1

mls qos srr-queue output dscp-map queue 1 threshold 3 32 40 46

mls qos srr-queue output dscp-map queue 2 threshold 1 16 18 20 22

mls qos srr-queue output dscp-map queue 2 threshold 1 26 28 30 34 36 38

mls qos srr-queue output dscp-map queue 2 threshold 2 24

mls qos srr-queue output dscp-map queue 2 threshold 3 48 56

mls qos srr-queue output dscp-map queue 3 threshold 3 0

mls qos srr-queue output dscp-map queue 4 threshold 1 8

mls qos srr-queue output dscp-map queue 4 threshold 2 10 12 14

 

interface giga x/x/x

queue-set 1

srr-queue bandwidth share 1 40 45 15

priority-queue out

mls qos trust dscp

################################################

This should be applied to a HP 5406zl switch. I'm looking for sample configs or a useful documentation.

Thanks

Udo

 

2 REPLIES 2
Mike_ES
Valued Contributor

Re: QoS on a 5406zl

Hello,

There is very fresh article with a lot of useful switch QoS information but only avaiable on the Arubapedia site, you can search it by title:

"Understanding QoS in ArubaOS-Switch"

Which PVOS version do you have?

Michal

Vince-Whirlwind
Honored Contributor

Re: QoS on a 5406zl

The main thing you need to look out for is that in HP, by default and in their manuals they map RTP packets to IP Precedence 6 instead of 5.

So when you have traffic coming from HP to a Cisco, RTP ends up in a lower-priority queue.