Aruba & ProVision-based

Replace Procurve 1800 1810 and 1820 By 2930F

 
kadis500
Occasional Contributor

Replace Procurve 1800 1810 and 1820 By 2930F

Hello ,

I will replace some Old procurve switches 1800 1810 and 1820 by 2930F switches.
The old switches have only Web access (GUI interface). So I need to translate the Gui to CLI.

Could you please confirm / correct if the translation bellow are goode (please see attached correspending GUI)?

Thank you

********** Switch 1800 ***********

Switch 1800.png
int 9
untagged 40
!
int 10
untagged 1
!
int 13
tagged 80
!
int 21
tagged vlan 1,40,80
!
trunk 12,14 trk1 lacp
interface trk1
tagged vlan 1,40,80


************ Switch 1810 *******************

Switch 1810.png
int 1-20,22-24
untagged 111
!
int 21,25
untagged 1
tagged 111
!
int 26
untagged 1

 

*********  Switch 1820******************

Switch 1820.png
int 1-4,6-7
untagged 1
!
int 5
untagged 104
!
int 8

untagged 1
tagged 8
!

1 REPLY 1
akg7
HPE Pro

Re: Replace Procurve 1800 1810 and 1820 By 2930F

Hello,

This looks good but it depends on your requirements.

Seems all snapshots are not attached.

If access port then it should be untagged and if trunk port then it should be tagged.

Thanks!

I am an HPE Employee

Accept or Kudo