I am playing with 2 procurve 2530 and can not get the stacking working completely. It works fine with telnet, but not through the webgui of the commander.
The commander does see the member switch and I can select the member switch from the top view, but nothing happens. something like: failed to create secured connection.
If i click stack view, I see the port layout of the commander and it tries to connect to the member. Also here I see the error failed to create secured connection.
Through the webgui of the commander, I removed the member switch from the stack. In the config of switch2, I can see it is removed. Then I set switch2 as a candidate and added it again to the stack, through the commanders webgui. Still the same problem. It is added to the stack, as seen in the config of switch2 and in the stack status. But through the webgui of the commander, I can select the member switch from the top view, but it just does not connect. "Failed to create secured connection".
What am I missing here?
----------------------
; J9855A Configuration Editor; Created on release #YA.15.17.0007 ; Ver #07:c3.84.9c.63.ff.37.27:50 hostname "switch1" console events critical console idle-timeout 300 console idle-timeout serial-usb 300 stack commander "HPSTACK" stack auto-grab stack member 1 mac-address .....-..... (-> mac address member switch) time daylight-time-rule western-europe time timezone 60 web-management ssl snmp-server community "public" unrestricted snmp-server contact "test" location "location" vlan 1 name "DEFAULT_VLAN" tagged 49-50 no ip address exit vlan 2 name "Management" untagged 1-48 tagged 49-50 ip address 10.0.0.1 255.255.255.0 exit primary-vlan 2 management-vlan 2 spanning-tree spanning-tree priority 1 force-version stp-compatible no tftp server no dhcp config-file-update no dhcp image-file-update password manager password operator
