Aruba & ProVision-based

Switch core hp procurve

 
dcastellano949
Occasional Visitor

Switch core hp procurve

we have 2 switch core hp procurve and for the vlan 4 (IPTV) channels works but the two channels from sky box are missing.

from box sky to a monitor works but through  untagged vlan does not work.

 

vlan 4
   name "IP_TV"
   tagged B1-B24,C1-C24,D1-D24,Trk1
   untagged J1-J8
   ip address 10.0.2.2 255.255.254.0
   ip igmp
   ip igmp querier interval 60
   qos priority 5
   vrrp vrid 1
      virtual-ip-address 10.0.2.1
      enable
      exit
   spanning-tree instance 1
   exit

 

 

5 REPLIES 5
dcastellano949
Occasional Visitor
dcastellano949
Occasional Visitor

Re: Switch core hp procurve

they this two ports where i connected the skybox. J5 and J7.

10.0.2.16

10.0.2.17

parnassus
Honored Contributor

Re: Switch core hp procurve

What exactly are you trying to achieve? What is the meaning of word "Channel" and "Monitor" considering you're writing about a Switch and a LAN topology? it's very difficult to understand what is your scenario...are you simply trying to connect an external black-box IP device through one interface or what else? Why are you using VRRP? Which Switch model are you working with?


I'm not an HPE Employee
Kudos and Accepted Solution banner
dcastellano949
Occasional Visitor

Re: Switch core hp procurve

yes sorry, sky box in a interface and plug to the switch core giving the ip 10.0.2.16 / 17

ports J5 and J7.

signal goes ou from skybox and then connected to ip encoder.

the thing is on HP Aruba Switch 1820-24g-PoE (does not work) and VLAN untagged.

and on the other old hp switch aruba i can see those channels.

i am confuse with that.

 

not sure why there is VRRP as eng added and he had no clue.

 

model switch core HP Procurve 2610

 

parnassus
Honored Contributor

Re: Switch core hp procurve

Are you able to simply draw it (with all relevant details)?


I'm not an HPE Employee
Kudos and Accepted Solution banner