HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

TFTP Upload of Start-up-config fails on Procurve 5412ZL Switch with error Invalid Input

 
SOLVED
Go to solution
Aulakhl
Occasional Contributor

TFTP Upload of Start-up-config fails on Procurve 5412ZL Switch with error Invalid Input

I am trying to restore a config of HP procurve 5412 ZL switch to another HP Procurve 5412 ZL switch through Tftp and it fails when the upload starts and gives error on each line of config "Invalid Input" and when its done trying to upload config and generates Invalid Input error on each line then at end it says corrupted download file, Both switches are on same flash version,
Any help please..?
1 REPLY
Aulakhl
Occasional Contributor
Solution

Re: TFTP Upload of Start-up-config fails on Procurve 5412ZL Switch with error Invalid Input

This happened because config needs to be edited before restoring, when you donwload config with tftp server sometime tftp server make some unnecessary spaces in config which whill error out as invalid input while restore,