Aruba & ProVision-based
1748041 Members
5081 Online
108757 Solutions
New Discussion

Re: Upgradeproblems with 2520 Switches

 
SWild
Occasional Contributor

Upgradeproblems with 2520 Switches

Hey there,

I wanted to upgrade my 2520 Switches from J.14 to J.15 firmware but the Switches will not boot the firmware. And one of the Switches does not boot the J.15 and I cannot access the "Monitor Rom Console" to switch back to the J.14 firmware. I really need your help.

Thanks a lot
Stephan

1 REPLY 1
SantoshPG
HPE Pro

Re: Upgradeproblems with 2520 Switches

I would check by resetting the switch to factory default on switch which is not booting. If issue still persists then log a case by contacting support. These switches have lifetime warranty.
Thank you,
I am an HPE employee
-------------------------------------------------------------------------
Was the post useful? Click on Kudos Thumb below