VLAN Tagging on ProCurve 1800-24G

[BK1993]

Hello,

i am trying to setup vlans on a 1800 procurve switch like shown below:

VLAN 10 Guest -> Port 23 Fibrechannel
VLAN 20 Internal -> Port 23 Fibrechannel
VLAN 1 Default ProCurve Switch -> Port 23 Fibrechannel

VLAN 10 Guest -> Port 18
VLAN 20 Internal -> Port 18
VLAN 1 Default -> Port 18


Actually all ports are in the default vlan 1. I created the other vlans (10 and 20) and i take port 18 in the vlans and the fc port 23.

The problem is that i cant figure out how to set it up that it works like this.
I only get one of the vlans routed for port 18.

- VLAN aware is enabled for all ports
- Ingress filtering is disabled for all ports
- The packet type for all ports is all

Can you give me a example to get it work?

Thank you very much for every reply!

[TerjeAFK]

Maybe this thread will clarify?

http://h30499.www3.hp.com/t5/Switches-Hubs-Modems-Legacy-ITRC/ProCurve-1800-VLAN-Confusion/td-p/4145580