- Community Home
- >
- Networking
- >
- Switching and Routing
- >
- Aruba & ProVision-based
- >
- VLAN configuration simple in 2610-48
-
- Forums
-
- Advancing Life & Work
- Advantage EX
- Alliances
- Around the Storage Block
- HPE Ezmeral: Uncut
- OEM Solutions
- Servers & Systems: The Right Compute
- Tech Insights
- The Cloud Experience Everywhere
- HPE Blog, Austria, Germany & Switzerland
- Blog HPE, France
- HPE Blog, Italy
- HPE Blog, Japan
- HPE Blog, Middle East
- HPE Blog, Russia
- HPE Blog, Saudi Arabia
- HPE Blog, South Africa
- HPE Blog, UK & Ireland
-
Blogs
- Advancing Life & Work
- Advantage EX
- Alliances
- Around the Storage Block
- HPE Blog, Latin America
- HPE Blog, Middle East
- HPE Blog, Saudi Arabia
- HPE Blog, South Africa
- HPE Blog, UK & Ireland
- HPE Ezmeral: Uncut
- OEM Solutions
- Servers & Systems: The Right Compute
- Tech Insights
- The Cloud Experience Everywhere
-
Information
- Community
- Welcome
- Getting Started
- FAQ
- Ranking Overview
- Rules of Participation
- Tips and Tricks
- Resources
- Announcements
- Email us
- Feedback
- Information Libraries
- Integrated Systems
- Networking
- Servers
- Storage
- Other HPE Sites
- Support Center
- Aruba Airheads Community
- Enterprise.nxt
- HPE Dev Community
- Cloud28+ Community
- Marketplace
-
Forums
-
Blogs
-
Information
-
English
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
08-23-2015 10:54 PM - edited 08-24-2015 09:29 AM
08-23-2015 10:54 PM - edited 08-24-2015 09:29 AM
I have two unmanaged(no vlan) switches connected to a managed switch (HP 2610-48). In the switch 1 I have a PC with ip 192.168.101.2/24 and switch 2 i have a pc with ip 192.168.102.2/24.
The managed switch in the VLAN101 interface 1 and interface 2 the vlan102 and 50 is the interface that connects to a machine on which this proxy cache installed as one pfsense ..
In pfsense I configured the IP VLAN101 192.168.101.1/24 and vlan102 with ip 192.168.102.1/24
Well I can not ping the VLAN interface pfsense, ie, either the ip 192.168.101.1 and 192.168.102.1.
I guess the problem I have in the switch configuration ProCurve 2610-48 is as follows:
Vlan 1
name "default_vlan"
untagged 1-52
ip address 192.168.199.1 255.255.255.0
exit
vlan 101
name "vlan101"
tagged 50
exit
vlan 102
name "vlan102"
tagged 50
exit
What's wrong?
Vlan 1
name "default_vlan"
untagged 1-52
ip address 192.168.199.1 255.255.255.0
exit
vlan 101
name "vlan101"
tagged 50
exit
vlan 102
name "vlan102"
tagged 50
exit
I tried it with other ProCurve Switch 1810G-24 and settings that show below seems to work but it seems to me that is not properly configured.
http://servyarte.com/pfsense4.jpg
http://servyarte.com/pfsense5.jpg
http://servyarte.com/pfsense6.jpg
http://servyarte.com/pfsense7.jpg
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
08-24-2015 10:56 AM
08-24-2015 10:56 AM
SolutionI have no clue about pfSense...
However, those ports where you have connected unamanaged switches, must be configured for the appropriate vlans
vlan 101
name "vlan101"
untagged 1
tagged 50
exit
vlan 102
name "vlan102"
untagged 2
tagged 50
exit
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
08-24-2015 03:07 PM
08-24-2015 03:07 PM
Re: VLAN configuration simple in 2610-48
Thanks a lot.
Tomorrow i will do testing.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
08-25-2015 12:04 AM
08-25-2015 12:04 AM
Re: VLAN configuration simple in 2610-48
Thanks a lot.
Now it works.
Regards.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
08-25-2015 12:16 AM
08-25-2015 12:16 AM
Re: VLAN configuration simple in 2610-48
My Pleasure...
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
12-09-2015 08:27 AM
12-09-2015 08:27 AM
Re: VLAN configuration simple in 2610-48
Hi all
I try implement also simple config, can anybody help me to detect what is wrong.
Running configuration:
; J9726A Configuration Editor; Created on release #WB.15.14.0012
; Ver #06:0c.18.f3.ff.35.0d:26
hostname "HP-2920-24G"
module 1 type j9726a
ip route 0.0.0.0 0.0.0.0 10.22.1.1
snmp-server community "public" unrestricted
openflow
controller-id 1 ip 10.22.1.26 port 6653 controller-interface vlan 3
instance "test"
listen-port 6653
member vlan 2
controller-id 1
version 1.3
enable
exit
enable
exit
oobm
ip address dhcp-bootp
exit
vlan 1
name "DEFAULT_VLAN"
no untagged 17-24
untagged 1-16,A1-A2,B1-B2
ip address 10.22.1.28 255.255.255.0
exit
vlan 2
name "hosts"
untagged 17-22
ip address 10.23.1.1 255.255.255.0
ip helper-address 10.22.1.1
voice
exit
vlan 3
name "controller"
untagged 23-24
ip address 10.24.1.1 255.255.255.0
ip helper-address 10.22.1.1
exit
password manager
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
12-09-2015 09:34 AM
12-09-2015 09:34 AM
Re: VLAN configuration simple in 2610-48
you need the "ip routing" command at the global config context to enable routing.
Hewlett Packard Enterprise International
- Communities
- HPE Blogs and Forum
© Copyright 2021 Hewlett Packard Enterprise Development LP