Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

Vlans are not working

 
Highlighted
Naorhe
Occasional Visitor

Vlans are not working

Hi to all,

I have Fortigate 200E and 5 Aruba 2530 and I setup VLANs but I can't work with them.

in the FortiGate, I set the interface as Link Aggregate and under him set-up 5 VLANs.

in the switches, I set port 23-24 as trunk and LACP, after it I set-up the VLANs name and assign them the IP address and netmask.

when I go to the "VLAN port assignment" and I change the TRK 1 to tagged all my network go down.

what I doing wrong???

in this link you have screenshots of the settings:

https://drive.google.com/drive/folders/1O_izqyjzEJzFDd42PQ_XBP3HoGGFUNk1?usp=sharing

1 REPLY 1
parnassus
Honored Contributor

Re: Vlans are not working

Try [*] to leave Trk1 untagged member of VLAN 1 (default VLAN)....I noticed you tagged it also on that VLAN.

Trk1 tagged in all other remaining VLAN looks OK.

[*] Consider thst, on Fortigate, it is not totally clear to me the tagging of created VLANs from the tiny screenshot (my take: VLAN 1 is untagged, all others are tagged on the LACP aggregate made of Port 1+2).