Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

Vrrp Owner command not functioning in HP 5412R

 
SantoshN
Occasional Advisor

Vrrp Owner command not functioning in HP 5412R

Hi,

We are unable to make Vrrp mode owner and command is not taking ..Can any one guide me is there any other command in HP 5412R

 

HP-Switch1-5412Rzl2# show vrrp vlan 32 vrid 32 config

 

 VRRP Virtual Router Configuration Information

 

  VLAN ID : 32

  Virtual Router ID : 32

 

  Administrative Status [Disabled] : Enabled

  Mode [Uninitialized] : Backup

  Priority [100] : 254

  Advertisement Interval [1] : 1

  Preempt Mode [True] : True

  Preempt Delay Time [0] : 0

  Respond To Virtual IP Ping Requests [Yes] : Yes

  Version [2] : 2

  Null authentication compatibility [False] : False

  Primary IP Address : Lowest

 

HP-Switch1-5412Rzl2(vlan-32-vrid-32)#  owner

Invalid input: owner

HP-Switch1-5412Rzl2(vlan-32-vrid-32)#

2 REPLIES 2
SantoshN
Occasional Advisor

Re: owner command not functioning in HP 5412R in Vrrp configuration

Even after reconfiguring the vrrp in 5412r switch in both switch 1 & switch 2 i am facing the same issue.

In both the switch the vrrp mode is showing backup and there is no command to make switch1 vrrp owner.

 

 

Vince-Whirlwind
Honored Contributor

Re: owner command not functioning in HP 5412R in Vrrp configuration

You have too many VRIDs.

My approach would be to have one VRID per (potential or actual) STP topology.
And/or one VRID per security Zone.