Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

aruba m2930 send custom syslog

 
febelus
Advisor

aruba m2930 send custom syslog

there is a command like cisco #send log "" that permit me to send a custon log from switch to syslog for create an alarm?

1 REPLY 1
rajkumar787
HPE Pro

Re: aruba m2930 send custom syslog

Hi,

By issuing the command 'Logging <IP Address>'  on the switch you can send the logs to the syslog server.

Options below:

 

HP-2620-48-PoEP(config)# logging ?
 facility              Specify the syslog facility value that will be used for  all syslog servers.
 filter                Create a filter to restrict what events are logged.
 IP-ADDR               Add an IPv4 address to the list of receiving syslog servers.
 IPV6-ADDR             Add an IPv6 address to the list of receiving syslog servers.
 notify                Notification of the specified type will be sent to the syslog server(s).
 origin-id             Specify the origin information for the syslog message.
 priority-descr        A text string associated with the values of facility, severity, and system-module.
 severity              Event messages of the specified severity or higher will be sent to the syslog server.
 system-module         Event messages of the specified system module (subsystem) will be sent to the syslog server.
HP-2620-48-PoEP(config)# logging

 

Thank You!
I am an HPE Employee

Accept or Kudo