bad routing HP 8212zl

[jhonfersg]

Hi, actually I have a problem with routing in Switch HP 8212zl.

I have configured a route for default 0.0.0.0 0.0.0.0 192.168.1.16 and other route 10.14.16.46 255.255.255.255 192.168.1.67.

When retry do a traceroute to the IP 10.14.16.46, the traceroute go for la IP 192.168.1.16 and not for IP 192.168.1.67.

Why not will go for the route configured 10.14.16.46 255.255.255.255 192.168.1.67?

I appreciate the response.

[Vince-Whirlwind]

Do a "show ip rout" on the switch?

And then do a show ip rout 10.14.16.46 on each of the other two devices.

[jhonfersg]

This process already this ready, but follow functioning bad.

I appreciate check other solution.

Thank you.

[Vince-Whirlwind]

I think you've misunderstood.

"Show ip route" is not a solution. You need to share this information we need to better understand your problem.

[jhonfersg]

Hi, I am sending the information solicited.

I am to the wait.

Thanks you.

[Vince-Whirlwind]

Based on the output of your sh ip route,  packets with destination IP 10.14.16.46 will use the 0.0.0.0 route as it is the only one they match.

[jhonfersg]

Hi, the problem already was solved, was a bug in the operating system, was solved installing a new firmware and reboot.

Thanks you.