Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

hpicfPortSecAuthFailure MAC-Adress

 
SEIT
Occasional Contributor

hpicfPortSecAuthFailure MAC-Adress

We have some 2920 switches and recieve on our monitoring server (HP IMC) the snmp trap hpicfPortSecAuthFailure. the mac-adress is something like àÕ^ê´¯. How can we get the correct formated mac-adresss?

3 REPLIES 3
nikunjbhatia
HPE Pro

Re: hpicfPortSecAuthFailure MAC-Adress

Hi


Requesting to please share the detailed problem desc.
I would also like to know the image of the device along with IMC versions working on it.

I am a HPE Employee
Accept or Kudo
SEIT
Occasional Contributor

Re: hpicfPortSecAuthFailure MAC-Adress

Hi,

the trap definition im IMC is this

trapdef.PNG

 

and the alarm shows this

 

alarm.PNG

The switch firmware version is WB.16.05.0004.

IMC version is E0605P06 on Windows 2012 R2

The hpicfUsrAuthWMAFailMAC parameter should be the correct MAC adress, so we can search for the device.

Highlighted
nikunjbhatia
HPE Pro

Re: hpicfPortSecAuthFailure MAC-Adress

Hi

 

I checked internally about it and founds to be compatible with versions..

There can be multiple issues and needs to analysis the logs as to why sync is not happening and there can be issue with port security authentications.

You will need to raise case with HPE for taking the remote session as sync is not happening and needs to be check in details

I am a HPE Employee
Accept or Kudo