Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

invalid input: voice on ProCurve Switch 2810-24G

 
LGMedia
Occasional Contributor

invalid input: voice on ProCurve Switch 2810-24G

Hello,

I am trying to enable the voice command on a ProCurve J9021A Switch 2810-24G Software revision N.11.69 and the switch returns an "Invalid input: voice" message

MASTER# config t
MASTER(config)# vlan 444
MASTER(vlan-444)# voice
Invalid input: voice
MASTER(vlan-444)# end

Any reason it wont take?



1 REPLY 1
EricAtHP
Esteemed Contributor

Re: invalid input: voice on ProCurve Switch 2810-24G

I took a quick look at the release notes for your switch: https://h10145.www1.hpe.com/Downloads/SoftwareReleases.aspx?ProductNumber=J9021A&lang=en&cc=us&prodSeriesId=3356808 and there is an entry that says that the switch doesn't support LLDP-MED so the voice command isn't really useful. There is a slightly newer software available, but i wouldn't expect the behavior to change.