Aruba & ProVision-based
cancel
Showing results for 
Search instead for 
Did you mean: 

issue with Multi tagged vlans

 
davidnah
Occasional Visitor

issue with Multi tagged vlans

Hi All,

im tring to enable few vlans on trunk, and can use few vlan on the same "Trk30"

when im configure vlan 10 as untagged i lose the vlan 1 untagged

Port Name Status Config-mode Speed Type Tagged Untagged
-------- ---------- ------- ------------- -------- ---------- ------ --------
A1-Trk10 Up Auto 10GigFD 10GbE-GEN multi 1
A2-Trk10 Up Auto 10GigFD 10GbE-GEN multi 1
A3-Trk30 Up Auto 10GigFD 10GbE-GEN No 1
A4-Trk30 Up Auto 10GigFD 10GbE-GEN No 1

 

vlan 10
name "DMZ"
tagged C1,Trk3-Trk4,Trk10-Trk11,Trk20-Trk24
untagged I1-I12
no ip address
exit

vlan 1
name "DEFAULT_VLAN"
tagged Trk3
no untagged I1-I14,I20-I24,J1-J8,J23-J24
untagged B1-B14,B20-B22,C1-C16,C18-C19,C21-C22,D1-D24,E1-E22,F1-F24,G1-G24,H1-H24,J9-J14,J18,J20,J22,Trk1-Trk2,Trk4,Trk10-Trk11,Trk20-Trk24,Trk30
ip address 192.168.47.1 255.255.248.0
exit

 thanks in advance

David,

 

1 REPLY 1
Vince-Whirlwind
Honored Contributor

Re: issue with Multi tagged vlans

Make both VLANs tagged on your trunk on this switch.

Make both VLANs tagged on the trunk on the connected switch.

Job done.