ntp on 5400 with k.14.41

[EckerA]

Hi,
sntp isn't working anymore with k.14.41. the setup isn't changed from bevor(K.13.63m) but now i only get :
all configured servers failed.
did someone get it to work?
thanks
alex

P.S. This thread has been moved from Switches, Hubs, Modems (Legacy ITRC forum) to ProCurve / ProVision-Based. - Hp Forum Moderator

[Tijl van der Steeg]

What are you using as a time server?

[EckerA]

Hi,
i don't know, it' not mine. but it worked before with "the same settings".
thanks
alex

[Mohammed Faiz]

Hi,

I'm running a few 5400 on K14.41 and sntp is working fine for me.
What do you get on a "sh sntp stat" ?

[EckerA]

Hi

SNTP Statistics

Received Packets : 0
Sent Packets : 5445
Dropped Packets : 0

SNTP Server Address Auth Failed Pkts
--------------------------------------- ----------------
10.64.114.40 0
10.16.8.55 0

i guess no solution there..
alex

[Tijl van der Steeg · Accepted solution]

Maybe the new firmware want NTP instead of SNTP. Have you tried changing that setting?

"timsync timep" instead of "timesync sntp"

[EckerA]

Thanks
that worked..
Alex

[Jarmo Laakso]

I have exactly the same problem. I upgraded from 13.68 to 14.41.

We have XNTPD 3.4y on Aix. Seems to be running timep which is a different protocol and it works but I would like to have NTP working.

[Tijl van der Steeg]

Every windows domain controller is an NTP server. Do you have any of those in your network?

[Jarmo Laakso]

That didn't come into my mind.

So i added a windows dc as ntp server with lower priority. Log says:
I 10/13/09 16:27:38 00414 SNTP: all configured servers failed
I 10/13/09 16:27:38 02631 SNTP: server not found at 10.1.31.234.
I 10/13/09 16:27:29 02631 SNTP: server not found at 10.0.16.8.