Aruba & ProVision-based
1745970 Members
4014 Online
108724 Solutions
New Discussion

procurve switch 2610-24 j9085a not booting

 
hany_elsayed
Occasional Advisor

procurve switch 2610-24 j9085a not booting

procurve switch 2610-24  j9085a

this switch was working fine and suddenly stopped working and stuck all the LEDs on and also falut led
Try to reset using the reset key, but nothing happens
Then conect the console Caleb and try to find out what happened but do not work too
Putty does not give anything similar if the switch is offline
Anyone with an idea

 

 

update

when i try move console cable putty give that 

 Untitled.png

 

3 REPLIES 3
slavtechbuer
Valued Contributor

Re: procurve switch 2610-24 j9085a not booting

Hi Mate,

Can you try to reset to factory defaults?

You must press and hold reset and clear button in the same time, after 2-3 seconds release reset and keep hold clear till 'test' led will start flashing, once when you will see release clear button as well. If image is corrupted reset to factory should help, unfortunately you will lost all settings. 

Hope that help

Kind Regards

Slav

hany_elsayed
Occasional Advisor

Re: procurve switch 2610-24 j9085a not booting

reset button  not make any change 

the switch not reset 

its not respond for any button 

 

 

update 

i open the cover of switch 

and found sound come from power supply 

hany_elsayed
Occasional Advisor

Re: procurve switch 2610-24 j9085a not booting

up