timezone sync in aruba 2540 24port switch in IST time

[ganil]

i set the time with NTP server and time in this switch ,but i want 24 hrs format but it is coming only 12hrs.

i am confusing when i checked the logs the time is AM or PM.

i want to sujest me wat type of commands to use .

 thnaks,

Anil 

[drk787 · Accepted solution]

Hi Anil,

Are you setting the clock in the switch with time command?

If yes, below is an example. If you want to set the time to 1:15PM, enter the command 'time 13:15:00'

HPJ9853(config)# show time
Wed Oct 10 05:58:49 2018
HPJ9853A(config)#
HPJ9853A(config)#
HPJ9853A(config)# time 13:15:00
Wed Oct 10 13:15:00 2018
HPJ9853A(config)# show time
Wed Oct 10 13:15:07 2018
HPJ9853A(config)#

If you are using a NTP server, the switch syncronizes the time that is set on the server.

[Mohsina_4]

Hello and Good Day,

Please refer the section "Clock Synchronization" in the link below:
https://www.arubanetworks.com/techdocs/ArubaOS_64x_WebHelp/Content/ArubaFrameStyles/Management_Utilities/Setting_the_System_Clock.htm

Also, can view the PDF "Aruba 2540 Management and Configuration Guide for Aruba OS Switch 16.05" Link:

1. https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00038752en_us

[maguanglongMike]

Hi There,

Please refer the link below:

https://community.arubanetworks.com/t5/Community-Tribal-Knowledge-Base/How-to-quickly-set-the-correct-time-on-your-Aruba-Controller-via/ta-p/17217

cheers

[ganil]

time zone is synced but time is AM or PM how to know ? 

please reply me

Thank you