AutoLoader 1/9 case part#?

[CA768521]

We have C9241CB#ABA (1/9 Surestore DLT1 Autoloader) that is rack-mount. I was surprised that it didn't come with the rack-mounts. Do these have to be purchased separately? Can one purchase just the case and have it be more of a standalone unit (not in a rack). Anyone have the part #'s for each of these (rack & case)?

Thanks in advance,

Ty

[#2 · Accepted solution]

Hello Ty,

You might be able to find what you're looking for at http://partsurfer.hp.com/

Good luck!

[CA713937]

If the case is not available as a purchasable part, there is another poster looking to convert from a desktop to a rackmount - perhaps they will sell you the case cheap :-)

http://bizforums.itrc.hp.com/cm/QuestionAnswer/1,,0x7d7a1cc6003bd6118fff0090279cd0f9,00.html

[CA713937]

Just realized I didn't answer all of your questions.

My understanding is that the rackmountable product does not include the rack mount hardware - that is a separate kit.

The part number is:
C7740R -- HP Autoloader 1/9 Rackmount Kit

[CA713937]

I did a bit more research on the enclosure. There is a skins kit available as well.

It is:
C7148A -- HP 1/9 Tape Autoloader Skins Kit

I found these listed in the fine print on the product data sheet:
http://www.hp.com/products1/storage/products/automatedbackup/pdfs/autoloaders/brochures/autoloader.pdf