Automated Backup
cancel
Showing results for 
Search instead for 
Did you mean: 

Autoloader 718 driver is not loaded

BR714954
Occasional Visitor

Autoloader 718 driver is not loaded

I have a 718 autoloader ! It was working fine last week but now,Win NT 4 server tells me, for the Quantum Dlt7000, that
(Driver is not loaded)

The only thing I did last week is to power down my servers & autoloader for a planned power shut !

When I restart the servers & autoloader my scsi card detected the 2 devices in the autoloader (HP & DLT part) so I tought everything was fine.

I search all my services & device "aic78xx" is mark started.

All my cables & terminator are correctly connected.

The unit is powered On and Ready.(no error) (no windows error either)

So now I don't know where else to look !

I'm quite sure the drive is working ! Probably a Windows problem but what...

Any advice is welcome
Thanks
5 REPLIES
CA830933
Occasional Advisor

Re: Autoloader 718 driver is not loaded

CA830933
Occasional Advisor

Re: Autoloader 718 driver is not loaded

Finally I've found some windows error

Event 119 & 7000

Also found this link but they don't seams to give the solution !

Any ideas
CA830933
Occasional Advisor

Re: Autoloader 718 driver is not loaded

It's my autoloader part that's not working !

I tried to load a tape manually & arcserve detect it !

someone know something about qic117 ??
CA830933
Occasional Advisor

Re: Autoloader 718 driver is not loaded

Solve my own problem !

ARCServe Bug !

Working fine now !
Joe_170
Occasional Visitor

Re: Autoloader 718 driver is not loaded

Jean, what ended up being the ArcServe problem?