Data Protector Failed but finishes with 100 percent

[lexd123123]

Hi Everyone,

Just want to know how to find out the file name which Data Protetor has failed on. 

Please see the log result below:

Summary

Job name

NSWRCC Server-FP Backup 2
Job type

Backup
Product

Data Protector Express 4.00-sp1 - 43064



Logging mode

Failed objects only
Backup mode

Full
Auto verify mode

No verify
Write mode

Overwrite all media
Span mode

Restart file
Change mode

Prompt for another media



Selected

131950 objects, 73.77 GB
Completed

131949 objects, 73.77 GB (100%)
Not attempted

1 objects, 4096 bytes (0%)

Timing

Start backup time

01/21/2013 8:30:00 PM
End backup Time

01/22/2013 12:20:42 AM



Start backup objects time

01/21/2013 8:45:16 PM
Elapsed backup objects time

3 hours,35 minutes,15 seconds
End backup objects time

01/22/2013 12:20:41 AM



Start task time

01/21/2013 8:30:00 PM
Elapsed task time

3 hours,53 minutes
End task time

01/22/2013 12:23:14 AM

Activity

Network\SERVER-FP\Data Protector Express Catalog


The object Data Protector Express Catalog has been backed up to the media Home\Admin\Server-FP Backup\SERVER-FP MON.

Disaster Recovery

Completed

The disaster recovery information was updated for the host SERVER-FP.

Devices

Network\SERVER-FP\HP DAT160 (Serial Number HU19252MCS)

Media

Home\Admin\Server-FP Backup\SERVER-FP MON
Completed

131949 objects, 73.77 GB
Media type

DAT160
Compression ratio:

0.7:1
Native total capacity:

85.56 GB
Native remaining capacity:

3.99 GB
Boot Track Status

A Disaster Recovery boot track was successfully written. This media is bootable and can be used with HP's One-Button Disaster Recovery (OBDR) solution.

Hosts

Network\SERVER-FP
Start backup objects time

01/21/2013 8:45:16 PM
Elapsed backup objects time

3 hours,35 minutes,15 seconds
End backup objects time

01/22/2013 12:20:41 AM



Selected

131950 objects, 73.77 GB
Completed

131949 objects, 73.77 GB (100%)
Not attempted

1 objects, 4096 bytes (0%)

P.S.This thread has been moved from Data Protector Support and News Forum to Storage > Automated Backup- HP Forums Moderator

[lexd123123]

Does anyone have a solution???? In the logs the data protector keeps showing up as failed... I've tried creating a new selection but its the same thing.

[iLanders]

Hi lexd123123,

i have your same problem.

Have you solved?

Thanks in advance.

iLanders

[Rajanikant]

Hi,

While configuring the backup job, in the " logging mode" change the default from " failed only" to " log all" for just once and once the job completes, you should have the details of all the files\folders backed up and also the file that is failing.