HPE Community
Automated Backup
1753506 Members
6473 Online
108794 Solutions
New Discussion

HP LTO Autoloader 1/9 (LVD) with Backupexec 8.6

 
Christo De Lange
New Member

‎09-03-2002 01:07 AM

‎09-03-2002 01:07 AM

HP LTO Autoloader 1/9 (LVD) with Backupexec 8.6

2 Questions!
1.What ideal SCSI card should I use with this Autoloader (It is LVD)

2. When backing up our HP Netserver LH4R Xeon remotely the throughput rate is only 35Mb/Min!
On other servers the throughput is ok (Varies between 50Mb/Min and 450Mb/Min) but still not what it should be. The LH4R sometimes just reboots itself during this backup if I use the Remote agent(At more or less the same point), but runs fine without the agent but at the price of a 60 hour backup!! (130Gb)
Please help!
0 Kudos
1 REPLY 1
CA713937
Honored Contributor

‎09-10-2002 07:36 PM

‎09-10-2002 07:36 PM

Re: HP LTO Autoloader 1/9 (LVD) with Backupexec 8.6

1. The recommended card is the Adaptec 29160.

The following website lists the netserver support for the 1/9:

http://www.hp.com/products1/storage/compatibility/hardware/ultrium-hp/index.html

Use of the embedded (SCSI B) port in a NetServer is not recommended (or supported).
The journey IS the reward.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.