HPE Community
Automated Backup
1753599 Members
6206 Online
108796 Solutions
New Discussion

Re: SureStore DAT 24x6 DDS-3 Not Recognized by BackupExec 8.0

 
CA766775
New Member

‎03-21-2002 05:24 AM

‎03-21-2002 05:24 AM

SureStore DAT 24x6 DDS-3 Not Recognized by BackupExec 8.0

It sees it as a single tape and doesn't recognize the changer. I've been emailing with them about the problem and I've identified an area where two registry keys that they say should match don't. Unfortunately, they can't seem to provide me with the location of the fix. Has anyone else had this problem? Is there an HP driver that solves this problem?
Thanks!
Illegitimae non carborundum
0 Kudos
1 REPLY 1
CA766775
New Member

‎03-21-2002 07:28 AM

‎03-21-2002 07:28 AM

Re: SureStore DAT 24x6 DDS-3 Not Recognized by BackupExec 8.0

I've figured this out. Turns out my SCSI adapter didn't have a LUN enabled. Had to go into the SCSI bios and do it manually. Not that they documented any of that anywhere, mind you.
Illegitimae non carborundum
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.