Norton Ghost Dos ASPI drivers for M820

[Patti Jessup]

Has anyone successfully used Norton Ghost and written an image to the M820. I need the DOS ASPI drivers, where can I get them. HELP!!!!

[Frederic Hosmann]

for m820e : http://www.hp.com/cposupport/swindexes/hpcd-write11063_swen.html

[Peter Toldi_3]

Patti

1, Set your card to 16 bit
2, Copy attached files to the root of your boot disk
3,Add this to your config.sys

device=a:\kmas365a.sys
device=a:\kmasaspa.sys
device=a:\kmascda.sys /d:pcmciacd

4,Add this to your autoexec.bat where H is your drive letter of your M820 (you can change this if you need to use different drive letter)

MSCDEX /d:pcmciacd /l:H

5, Boot from you floppy where H: is you M820 CRW.

(You can't write image file direct to CDW because Ghost not a CD burning software. You can write image to a file and burn that file to a CDW, than use that CD as described above to reimage your hard disk.)

The above should work unless your laptop also needs Card/Socket Services.

[David Chien]

http://www.met.net.cn/download/cdrw.htm#MP8040

m820e is identical basically to the ricoh mp8040se.

try using the dos drivers from ricoh.